Seekins Precision

Parts & Accessories

Parts & Accessories

  1. SP Safety Selector Kit

    SP Safety Selector Kit

    • 90 degree standard throw lever
    • 60 degree short throw lever
    • Available in black or color anodize
    • Drop in replacement for Mil-Spec selector switch
    • Fully ambidextrous
  2. Key Mod Rail

    Key Mod Rail

      Field adaptable and easy to install, Seekins aluminum Key Mod Rails are the best way to mount accessories on any Key Mod system hand guard.

    • Precision machined from 6061 T6 Aluminum
    • Mil-Spec 1913 Picatinny dimension
    • Type III Class 2 Hardcoat Anodized matte black
    • Alignment Stud machined in place eliminates movement
    • Mounting screws included
    • Snag free design

    • Starting at: $20.00

      More Info
  3. Scope Rings - 30mm Tube

    Scope Rings - 30mm Tube

    Scopes are only as good as the rings they are mounted in. Seekins Precision Scope Rings are the best available through superior design, precision machining and obsessive attention to detail. Built to the 1913 Picatinny Specification from 7075-T6 aluminum, these Seekins scope rings are available in 30mm and in heights from Low through AR High to accommodate most rifle and optic combinations.

    • Perfectly CNC Machined 7075-T6 Billet
    • 1913 Picatinny Mil-Spec
    • Type III Class 2 Hardcoat Anodized Finish
    • Center lug machined into place
    • Grade 8 T25 Torx Screws
    • Serialized Pairs
    • Slim Line Clamps

  4. Micro T1 Mount

    Micro T1 Mount

    This lightweight, exceptionally strong mount for the Aimpoint Micro T-1 is perfect for any tactical, competition or sporting AR platform. Precision machined from billet aluminum to mount on 1913 Picatinny rails.

    • Lightweight with reinforced structural integrity
    • Machined from 6061-T6 billet aluminum
    • Recoil lug integrated to prevent any movement
    • Mounts to 1913 Picatinny rails
    • Two side clamps for a secure mount attachment
    • Grade 8 T25 Torx screws
    • $79.00
      More Info
  5. Melonited Gas Tube

    Melonited Gas Tube

      Built to MIL-SPEC dimensions and exceeding the standards, Seekins Precision gas tubes are available in rifle, mid-length, carbine and pistol lengths to accommodate any AR platform.

      • Made to MIL-SPEC dimensions
      • Melonite coated to resist corrosion
      • Roll Pin included
      • Available in multiple lengths

    • $17.00
      More Info
  6. AICS Short Action (no magazine)

    AICS Short Action (no magazine)

    • Short Action Bottom metal (no magazine)
    • Aluminum Pillars
    • Grade 8 Socket Head Action Screws
    • Assembly Instructions
    • Short Action uses AICS or AW short action magazines

  7. Billet Trigger Guard

    Billet Trigger Guard

      A quick and easy to install upgrade, the Billet Trigger Guard made to allow use with winter gloves and eliminates the uncomfortable gap between the grip and mil-spec trigger guards.

    • Allows use with winter gloves
    • CNC machined from 6061-T6 billet aluminum
    • Easy to install drop in replacement for mil-spec lower receivers
    • Available in different colors
    • $19.99
      More Info
  8. SRS Rail, HS Precision 2.0" Hole Spacing

    SRS Rail, HS Precision 2.0" Hole Spacing

    The SRS (Sling Rail System) is a Picatinny bipod mounting rail with a reinforced, integral, non-rotating sling attachment point that mounts on the bottom of bolt action rifle stocks. Utilizes 2.0” hole spacing for HS Precision stocks.

    • Anti Rotation Sling Mount
    • CNC machined from 6061-T6 billet aluminum
    • Mil-Spec 1913 Picatinny Rail
    • Type III Class 2 Hardcoat Anodizing matte black
    • Mounting screws included

    • $24.00
      More Info
  9. BAR Handguards

    BAR Handguards

      The BAR Hand Guard, a.k.a. the Bad Ass Rail, was designed with a larger inside diameter to fit over suppressors. This allows use of maximum length hand guards with short, suppressed barrels. Machined from aluminum, built in sling mounts and awesome looks, the BAD Ass Rail Hand Guard is a must have for suppressed ARs.

      • 6061T6 Construction
      • Seamless Top Rail
      • 1 piece free float design
      • Aluminum mounting barrel nut and mounting hardware included
      • 1.8" Inside Diameter to accept suppressors
      • Anti-Rotation Tabs
      • Mil-Spec 1913 Picatinny Rails
      • Type III Class 2 Hardcoat Anodized Finish
      • 5 Machined in Anti-Rotation QD Sling Mounts
      • Scalloped Rails to remove all sharp edges for Comfort
  10. 0 MOA Scope Bases

    0 MOA Scope Bases

    Scope bases are an often overlooked, yet critical component to building the best precision rifle system possible. Machined from 7075-T6 aluminum to the 1913 Picatinny Specification, Seekins Precision Scope Bases are the best components available for mounting precision optics to precision rifles.

    • 7075-T6 Billet
    • Continuous rail
    • One piece design
    • Built to 1913 Picatinny Mil-Spec
    • Type III Class 2 Hardcoat Anodized Finish
  11. SBA15 Lower

    SBA15 Lower

    • 7075-T6 Billet Aluminum
    • Ambidextrous bolt release
    • Mil-Spec component compatible
    • SP Enhanced bolt catch
    • Upper tensioning set screw
    • Screw in pins instead of roll pins for precise, non-marring assembly
    • Bullet pictogram selector markings
    • Type III Class 2 Hardcoat Anodized Finish
    • Includes ambi bolt stop assembly

    • $259.00
      More Info
  12. 8" SS Barrel

    8" SS Barrel

      Seekins Precision 8” barrels are perfect for AR pistols or Personal Defense Weapons. Precision CNC machined from premium stainless steel blanks. If choosing a radially fluted barrel, cooling fins are added during manufacture to help dissipate heat. Each barrel is inspected four times to insure match grade tolerances for maximum accuracy and performance. Available in .223 Wylde or .300 Blackout, both chamberings use a pistol length gas system.

      • Precision machined to match grade tolerances for maximum accuracy
      • Available chambered in .223 Wylde or .300 Blackout
      • Non-glare bead blasted stainless steel for longevity and ease of maintenance
      • Optional radial fluting
      • 5R Button Rifling

  13. IRMT-3 V3 Upper

    IRMT-3 V3 Upper

    • Seekins Precision Billet iRMT-3 V3 Upper
    • CNC Machined from 7075-T6 Billet
    • M4 Feed Ramps
    • Mil-Spec 1913 Picatinny Rail
    • Integrated rail mounting technology
    • Type III Class 2 Hardcoat Anodized Finish

    • $299.00
      More Info
  14. Scope Rings - 34mm Tube

    Scope Rings - 34mm Tube

    Scopes are only as good as the rings they are mounted in. Seekins Precision Scope Rings are the best available through superior design, precision machining and obsessive attention to detail. Built to the 1913 Picatinny Specification from 7075-T6 aluminum, these Seekins scope rings are available in 34mm and in heights from Low through AR High to accommodate most rifle and optic combinations.

    • Perfectly CNC Machined 7075-T6 Billet
    • 1913 Picatinny Mil-Spec
    • Type III Class 2 Hardcoat Anodized Finish
    • Center lug machined into place
    • Grade 8 T25 Torx Screws
    • Serialized Pairs
    • Slim Line Clamps

  15. AICS Long Action (no magazine)

    AICS Long Action (no magazine)

    • Long Action Bottom metal (no magazine)
    • Aluminum Pillars
    • Grade 8 Socket Head Action Screws
    • Assembly Instructions
    • Long Action uses AICS 300win mag magazines

  16. Low Mass Bolt Carrier Group

    Low Mass Bolt Carrier Group

      The Seekins Precision Low Mass Bolt Carrier Group is a significant upgrade for M16 and AR15s. Used as part of a tuned gas system, it can help reduce felt recoil for improved follow up shot capability. Compatible with all full auto sears or RDIAS and Melonite coated for durability, the Low Mass Bolt Carrier Group exceeds MIL-SPEC requirements.

      • Approximately 1.4oz lighter than standard bolt carrier group
      • Lighter weight helps reduce recoil
      • Drop in upgrade for M16s or AR15s
      • Melonite coated to reduce wear and corrosion
      • Exceeds MIL-SPEC requirements

  17. M16 Bolt Carrier Group

    M16 Bolt Carrier Group

      This drop in upgrade for any M16 or AR15 exceeds MIL-SPEC requirements. Auto sear and RDIAS compatible, the Seekins Precision Bolt Carrier Group is Melonite coated for durability and ease of cleaning.

      • Drop in replacement for M16 or AR15
      • Melonite coated to resist wear and corrosion
      • Exceeds MIL-SPEC requirements

    • $150.00
      More Info
  18. Billet Mag Release

    Billet Mag Release

      The Billet Mag Release Button is a drop in upgrade for any AR Rifle. CNC machined from a solid piece of aluminum, you can have any color you want as long as it’s black, or green, or blue, or red…

    • Diamond texture for positive engagement
    • Made from 6061 billet
    • MIL-SPEC Softcoat Anodize
    • Comes in different colors
    • $5.99
      More Info
  19. SP223 Gen2 Billet Lower - with Logo

    SP223 Gen2 Billet Lower - with Logo

    Precision CNC machined from solid billet aluminum, the SP223 Billet Lower is the best AR lower receiver available. Far exceeding Mil-Spec requirements, the SP 223 has features not found on standard lowers such as the Seekins Precision Enhanced Bolt Catch, receiver tensioning screw, ambi-bolt stop assembly and an oversized trigger guard. These features combined with superior fit and finish make the SP223 the perfect foundation for any AR build.

    • 7075-T6 Billet Aluminum
    • Ambidextrous bolt release
    • Mil-Spec component compatible
    • SP Enhanced bolt catch
    • Upper tensioning set screw
    • Screw in pins instead of roll pins for precise, non-marring assembly
    • Bullet pictogram selector markings
    • Type III Class 2 Hardcoat Anodized Finish
    • Includes ambi bolt stop assy

    • $259.00
      More Info
  20. AR ATC muzzle brake

    AR ATC muzzle brake

    Superior performance and unique, easy installation set the Seekins Precision Advanced Tactical Compensator apart from other muzzle devices. Stainless steel construction, innovative design and unrivaled reduction in muzzle rise and recoil make the ATC the best compensator available.

    • Innovative port design
    • Superior reduction in recoil and muzzle rise
    • 416R stainless construction
    • Bead blasted finish or Black Melonite
    • .223/5.56 and .300/.308 (½-28 or 5/8-24 thread pitch)
    • Starting at: $129.00

      More Info
  21. iRMT-R Upper

    iRMT-R Upper

    • Seekins Precision Billet iRMT-R Upper
    • CNC Machined from 7075 Billet
    • M4 Feed Ramps
    • Mil-Spec 1913 Picatinny Rail
    • Integrated rail mounting technology
    • Titanium barrel nut
    • Type III Class 2 Hardcoat Anodized Finish
    • Weight (as shipped) : 14.25 oz

    • $299.00
      More Info
  22. Scope Rings - 35mm Tube

    Scope Rings - 35mm Tube

    Scopes are only as good as the rings they are mounted in. Seekins Precision Scope Rings are the best available through superior design, precision machining and obsessive attention to detail. Built to the 1913 Picatinny Specification from 7075-T6 aluminum, these Seekins scope rings are available in 35mm and in heights from Low through Extra High to accommodate most rifle and optic combinations.

    • Perfectly CNC Machined 7075-T6 Billet
    • 1913 Picatinny Mil-Spec
    • Type III Class 2 Hardcoat Anodized Finish
    • Center lug machined into place
    • Grade 8 T25 Torx Screws
    • Serialized Pairs
    • Slim Line Clamps

  23. AICS Long Action CIP

    AICS Long Action CIP

    This is a must have for .338 Lapua Rifles. The Seekins Precision AICS Long Action CIP DBM (Detachable Bottom Metal) kit gives Remington 700 style bolt action rifles increased round capacity and rapid reloading, mandatory capabilities for any serious shooter. Easy to manipulate and snag free, the AICS Long Action CIP DBM is machined from billet aluminum for strength and reliability.

    • Bottom metal
    • Aluminum Pillars
    • Grade 8 Socket Head Action Screws
    • Assembly Instructions
    • Seekins Precision DBM kits work on most all custom actions modeled after the Remington 700
    • Uses AICS Long Action CIP magazines (not included)
    • $219.00
      More Info
  24. 10.5" SS Barrel

    10.5" SS Barrel

      The 10.5” Seekins barrel is versatile, great for use on AR pistols or Short Barreled Rifles. Precision CNC machined from premium stainless steel blanks, each barrel is inspected four times to insure match grade tolerances for maximum accuracy and performance. Available in .223 Wylde using a carbine length gas system, or in the very suppressible .300 Blackout using a pistol length gas system.

      • Precision machined to match grade tolerances for maximum accuracy
      • Available chambered in .223 Wylde or .300 Blackout
      • Non-glare bead blasted stainless steel for longevity and ease of maintenance
      • Optional radial fluting
      • 5R Button Rifling

  25. SRS Rail, Bell & Carlson 2.5" Hole Spacing

    SRS Rail, Bell & Carlson 2.5" Hole Spacing

    The SRS (Sling Rail System) is a Picatinny bipod mounting rail with a reinforced, integral, non-rotating sling attachment point that mounts on the bottom of bolt action rifle stocks. Utilizes 2.5” hole spacing for Bell and Carlson stocks.

    • Anti Rotation Sling Mount
    • CNC machined from 6061-T6 billet aluminum
    • Mil-Spec 1913 Picatinny Rail
    • Type III Class 2 Hardcoat Anodizing matte black
    • Mounting screws included

  26. 30 MOA Scope Bases

    30 MOA Scope Bases

    Scope bases are an often overlooked, yet critical component to building the best precision rifle system possible. Machined from 7075-T6 aluminum to the 1913 Picatinny Specification, Seekins Precision Scope Bases are the best components available for mounting precision optics to precision rifles.

    • 7075-T6 Billet
    • Continuous rail
    • One piece design
    • Built to 1913 Picatinny Mil-Spec
    • Type III Class 2 Hardcoat Anodized Finish
    • Starting at: $99.99

      More Info
  27. SP223 Gen2 Billet Lower - No Logo

    SP223 Gen2 Billet Lower - No Logo

    Precision CNC machined from solid billet aluminum, the SP223 Billet Lower is the best AR lower receiver available. Far exceeding Mil-Spec requirements, the SP 223 has features not found on standard lowers such as the Seekins Precision Enhanced Bolt Catch, receiver tensioning screw, ambi-bolt stop assembly and an oversized trigger guard. These features combined with superior fit and finish make the SP223 the perfect foundation for any AR build.

    • 7075-T6 Billet Aluminum
    • Ambidextrous bolt release
    • Mil-Spec component compatible
    • SP Enhanced bolt catch
    • Upper tensioning set screw
    • Screw in pins instead of roll pins for precise, non-marring assembly
    • Bullet pictogram selector markings
    • Type III Class 2 Hardcoat Anodized Finish
    • Includes ambi bolt stop assy

    • $259.00
      More Info
  28. Flash Hider

    Flash Hider

    The Seekins Precision Flash Hider is as innovative as it is effective. The unique design eliminates muzzle flash, is easy to install and is available for either .223Cal or .300 Blackout.

    • Unique design eliminates muzzle flash
    • Available with 1/2x28 or 5/8x24 threads
    • Tri prong design eliminates need for crush washer or timing
    • Does not make an audible “ping” when shooting
    • For .223/5.56 or .300 BLKOUT
    • Melonited Steel construction
    • Starting at: $55.00

      More Info
  29. SP15 Forged Upper

    SP15 Forged Upper

    The SP15 Battlefield Upper, machined from a forging of 7075-T6 aluminum, exceeds Mil-Spec standards though precision manufacturing to exceptional standards and exacting attention to detail. Made to be compatible with Mil-Spec parts, the SP15 is the best forged Mil-Spec upper receiver available.

    • Precision machined to exceed mil-spec standards
    • Fully compatible with Mil-Spec parts
    • Machined from forged 7075-T6 aluminum
    • Picatinny Rail
    • Full length top Picatinny rail
    • Type III Class 2 Hardcoat Anodized Finish
  30. 1" tube, .76", 4 cap screw

    1" tube, .76", 4 cap screw

    Scopes are only as good as the rings they are mounted in. Seekins Precision Scope Rings are the best available through superior design, precision machining and obsessive attention to detail. Built to the 1913 Picatinny Specification from 7075-T6 aluminum, these Seekins scope rings are available in 1"and in .76" height to accommodate most rifle and optic combinations.

    • Perfectly CNC Machined 7075-T6 Billet
    • 1913 Picatinny Mil-Spec
    • Type III Class 2 Hardcoat Anodized Finish
    • Center lug machined into place
    • Grade 8 T25 Torx Screws
    • Serialized Pairs
    • Slim Line Clamps

    • $119.00
      More Info
  31. 12" SS Barrel

    12" SS Barrel

      To get carbine performance from a short barreled rifle, Seekins offers a 12” barrel. Precision CNC machined from premium stainless steel blanks, each barrel is inspected four times to insure match grade tolerances for maximum accuracy and performance. Available in .223 Wylde using a carbine length gas system, or in the very suppressible .300 Blackout using a pistol length gas system.

      • Precision machined to match grade tolerances for maximum accuracy
      • Available chambered in .223 Wylde or .300 Blackout
      • Non-glare bead blasted stainless steel for longevity and ease of maintenance
      • Optional radial fluting
      • 5R Button Rifling

  32. SP15 Forged Lower

    SP15 Forged Lower

    • 7075 T6 MIL-SPEC Forging
    • Type III Class 2 Hardcoat Anodized Finish
    • $94.00
      More Info
  33. SRS Rail, McMillan 3.0" Hole Spacing

    SRS Rail, McMillan 3.0" Hole Spacing

    The SRS (Sling Rail System) is a Picatinny bipod mounting rail with a reinforced, integral, non-rotating sling attachment point that mounts on the bottom of bolt action rifle stocks. Utilizes 3.0” hole spacing.

    • Anti Rotation Sling Mount
    • CNC machined from 6061-T6 billet aluminum
    • Mil-Spec 1913 Picatinny Rail
    • Type III Class 2 Hardcoat Anodizing matte black
    • Mounting screws included

  34. MCSR V2 KeyMod Rail

    MCSR V2 KeyMod Rail

      Extremely lightweight, suppressor compatible and infinitely adaptable because of the Key Mod attachment system, the Modular Combat Suppressor Rail V2 (MCSR V2) is perfect for tactical and competition use. Precision machined from 6061-T6 aluminum, it features a seamless top Picatinny rail and Key Mod slots at 3, 6 and 9 O’clock positions for solid mounting of accessories where needed.

      • Machined from 6061-T6 aluminum
      • Seamless top rail
      • 1 piece free float design
      • Aluminum barrel nut and mounting hardware included
      • 1.8” inside diameter
      • Anti-rotation tabs
      • QD mounts at 3, 6 and 9 O’clock
      • Type III Class 2 Hardcoat Anodized Finish
    • Starting at: $189.00

      More Info
  35. 14.5" SS Barrel

    14.5" SS Barrel

      Seekins 14.5” barrel is the quintessential carbine barrel for the AR platform. Precision CNC machined from premium stainless steel blanks, each barrel is inspected four times to insure match grade tolerances for maximum accuracy and performance. Available in .223 Wylde using a mid length gas system, or in the very suppressible .300 Blackout using a carbine length gas system.

      • Precision machined to match grade tolerances for maximum accuracy
      • Available chambered in .223 Wylde or .300 Blackout
      • Non-glare bead blasted stainless steel for longevity and ease of maintenance
      • 5R Button Rifling

  36. Billet 223 Upper

    Billet 223 Upper

    • Seekins Precision Billet Upper
    • CNC Machined from 7075-T6 Billet
    • M4 Feed Ramps
    • MIL-SPEC 1913 Picatinny Rail
    • Type III Class 2 Hardcoat Anodized Finish

    • $239.00
      More Info
  37. SP3R V3 Mod Rail

    SP3R V3 Mod Rail

    The SP3RV3 by Seekins Precision brings precision rifle stock performance to an AR platform hand guard. Flat on the bottom for stability when shooting off of barricades or other objects, the unique design is thin for use in dynamic shooting and rifle handling situations. Machined from 6061-T6 aluminum with KeyMod slots, a top integral rail and integral QD sling mounting points, the SP3RV3 is the perfect hand guard for tactical, competition or sporting applications.

    • Precision rifle, flat bottom design for stability
    • Machined from 6061-T6 aluminum
    • 1pc Free Float Design
    • Type III Class 2 Hardcoat Anodized matte black
    • Six integrally machined anti-rotation QD sling mounts
    • Comes with mounting hardware
    • Starting at: $225.00

      More Info
  38. 20 MOA Scope Bases

    20 MOA Scope Bases

    Scope bases are an often overlooked, yet critical component to building the best precision rifle system possible. Machined from 7075-T6 aluminum to the 1913 Picatinny Specification, Seekins Precision Scope Bases are the best components available for mounting precision optics to precision rifles.

    • 7075-T6 Billet
    • Continuous rail
    • One piece design
    • Built to 1913 Picatinny Mil-Spec
    • Type III Class 2 Hardcoat Anodized Finish
    • Starting at: $99.99

      More Info
  39. 16" SS Barrel

    16" SS Barrel

      Seekins 16” barrels provide precision rifle performance in carbine length guns. Precision CNC machined from premium stainless steel blanks, each barrel is inspected four times to insure match grade tolerances for maximum accuracy and performance. Available in .223 Wylde using a mid length gas system, or in the very suppressible .300 Blackout using a carbine length gas system.

      • Precision machined to match grade tolerances for maximum accuracy
      • Available chambered in .223 Wylde or .300 Blackout
      • Non-glare bead blasted stainless steel for longevity and ease of maintenance
      • 5R Button Rifling

  40. Low Profile Adjustable Gas Block .750 dia

    Low Profile Adjustable Gas Block .750 dia

    • Seekins Precision's Adjustable Gas Block allows you to fine tune your rifle's gas system.
    • The gas block is designed to be field adjustable.
    • A brass friction screw is used to lock the adjustment screw in place.
    • Turn adjustment screw in to lessen the amount of gas and out to add more gas.

    • $59.99
      More Info
  41. 18" SS Barrel

    18" SS Barrel

      The 18” barrel is the perfect barrel for precision rifle accuracy and carbine handling performance. Precision CNC machined from premium stainless steel blanks, each barrel is inspected four times to insure match grade tolerances for maximum accuracy and performance. Available in .223 Wylde using a rifle length gas system.

      • Precision machined to match grade tolerances for maximum accuracy
      • Available chambered in .223 Wylde
      • Non-glare bead blasted stainless steel for longevity and ease of maintenance
      • 5R Button Rifling

Back to top